TruePulse is searching for NTCA50BA and NTCA51AB for the Nortel Optera LH1600.
The NTCA50BA, HECI code SNCPN90 is a Partitioned OPC Controller for the Nortel LH1600. It may also be known as the Ciena NTCA50BA.
NTCA51AB, HECI code SN1PDDC, is a Partitioned OPC Storage for the Nortel LH1600. It may also be known as the Ciena NTCA51AB.
When installed in the main control shelf, the OPC storage, OPC controller and OPC interface are used as primary or backup OPCs for network elements in the same span of control. You must install a set of OPC circuit packs in at least one network element in a span of control. It is recommended that you install one main and one backup set of OPC circuit packs in each span of control.
When equipped, the OPC storage is a double-slot width circuit pack and it is installed in slot 3 and 4 of the control shelf. The OPC controller is installed in slot 5 of the control shelf. The OPC interface is installed in slot 12 of the control shelf.
Ciena no longer supports any modules for the LH1600 system.
Please let us know if you have any surplus NTCA50BA and NTCA51AB.
Updated July 6, 2022